Sensormatic Intellex Provozní pokyny Strana 45

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 238
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 44
Intellex RMS Digital Video Management System
System Setup 29
Procedure for Forcing an Intellex modem to Disconnect
NOTE: The first two procedures require that you have physical access to the Intellex
unit. You cannot force a modem to disconnect via remote control.
Graceful disconnect
1. Exit the Intellex application software.
2. Double-click on the Dial-up Server icon in the System tray.
3. Click the Disconnect button.
4. Restart the Intellex application.
Non-graceful disconnect
1. Unplug the telephone cord from the wall telephone jack.
2. Plug the telephone cord back into the same wall telephone jack.
Timed disconnect
1. Click Start, Settings, then Network and Dial-up Connections, and click on
Incoming connections.
2. In the Incoming connections window click on the Properties button.
3. Check the box labeled “Disconnect a call if idle for more than [ ] mins.” Change
the number in the box to 10 (ten).
4. Click OK to save the changes to the Modem Properties window, and click OK
again to close the Incoming connections window.
Graceful disconnect will allow a user to immediately redial and reconnect to the
Intellex unit; however, this method will momentarily disrupt recording on the unit.
Non-graceful disconnect will not affect recording, but it may temporarily render the
modem unable to receive incoming calls. Timed disconnect will automatically
disconnect the modem after ten minutes of inactivity. This will prevent others from
dialing in and monopolizing the connection, and it will also force the modem to drop
the line after a non-graceful disconnect.
Zobrazit stránku 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 237 238

Komentáře k této Příručce

Žádné komentáře