Sensormatic Intellex Provozní pokyny stáhnout pdf (Strana 126)

Installation and Operating Instructions

110 Setup Options

Camera Selectable Rate Option

You can assign a higher or lower recording rate to each camera on the Intellex unit. A

camera used to record more critical activity, like a point of sale (POS) location, can be

configured to record at a higher rate than a camera used to record less critical activity.

Alarm rates also affect the per camera record rate, depending on the importance of the

activity being recorded.

Important Factors in Setting the Recording Rate

Before you configure the recording rate on a per camera basis, determine how many

cameras are connected and how they are configured:

• What is the lowest recording rate per camera that you wish to use?

• What maximum recording rate per camera do you want to use for cameras

recording at a lower rate?

• Which cameras must record at a higher recording rate?

• How important is the recorded activity in the alarm state?

The overall recording rate on an Intellex RMS unit is 120 ips (NTSC), or 100 ips (PAL).

Auto Rate mode allows the Intellex unit to set all the cameras’ recording rates

automatically, distributing the maximum recording rate evenly across all active

cameras. In this case, the Normal Rate, Alarm Rate and Single Camera Rate boxes are

active with scroll lists on which you can select total system (“aggregate”) recording

rates. Auto Rate is the default setting.

Use the Camera Selectable Rate mode to individually set the recording rate for each

camera; for example, you may want to assign a higher recording rate to a camera that

records more critical activity, like a camera placed at a point of sale (POS) location.

The guaranteed lowest possible recording rate per camera is .93 ips (NTSC) or 0.78 ips

(PAL). The highest recording rate for any single camera is 30 ips (NTSC) or 25 ips

(PAL), regardless of the total system (“aggregate”) recording rate. Various recording

rates are assigned depending on the number of enabled cameras and on the aggregate

rate.

The selectable recording rates for Intellex are as follows:

NTSC PAL

.93 ips 0.78 ips

1.87 ips 1.5 ips

Table 1 — Selectable Recording Rates

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 237 238

Žádné komentáře

Sensormatic Intellex Provozní pokyny Strana 126