
Installation and Operating Instructions
112 Setup Options
Auto Rate Mode
Auto Rate Mode allows the Intellex unit to establish camera rates automatically,
distributing the rate evenly across the number of cameras in the system. In this case,
the Normal Rate and Alarm Rate pull-down menus are accessible with the selectable
aggregate recording rates. Selectable rates are described in Table 1 — Selectable
Recording Rates on page 110.
NOTE: You must possess the Setup Schedule privilege to set or change the
recording rate.
1. From the main screen, click the Setup button. The Setup Options screen appears.
2. Click the Rate button. The Mode tab appears.
The following table describes the components of the Mode tab.
Configured Alarm
Rate
The maximum alarm rate that you have configured for a
given camera. If no other cameras on the system are
alarmed, the configured alarm rate equals the actual
rate.
Actual Rate The rate at which a camera is actually recording.
If there are no alarmed cameras, the actual rate is
guaranteed to be the configured normal rate of that
camera.
If the camera is the only alarmed camera, its actual rate
is guaranteed to be the configured alarm rate.
If there are other cameras in the alarmed state, the rate is
not guaranteed.
Rate
Mode
Use Auto Rate Mode Allows the Intellex unit to automatically
distribute the image per second rate evenly
across the active cameras.
Use Per Camera Rate
Mode
Allows you to select the rate of each camera.
For more information, see Camera
Selectable Rate on page 113.
Normal
Rate
Allows you to set the desired aggregate system rate when there are
no alarmed cameras.
Alarm
Rate
Allows you to set the desired aggregate system rate when there are
one or more alarmed cameras.
Single
Camera
Rate
Allows you to set the single camera record rate when in Single
Camera Schedule mode.
Komentáře k této Příručce